Jackson USA Custom Shop 2014 RR1 Randy Rhoads with EMG

This is the “RR1 Randy Rhodes” model with a matte black finish.

It has a rare configuration and comes equipped with EMG “81-X” and “85-X” pickups straight from the factory. The battery compartment for powering these is located on the back of the body.

The controls consist of a volume knob, two tone knobs, a three-way pickup selector and a kill switch.

There are some glossy spots and scuff marks on the finish, as well as a small area of peeling paint at the tip of the V-shaped body. However, there is no significant damage that detracts from the overall appearance.

The neck and truss rod are in good condition, and the guitar plays well.

Appearance: Some minor scratches, but in good condition considering its age
Frets: Over 80% intact
Neck Condition: No issues
Truss Rod: Works well
Replaced Parts: None
Repair/Modification History: None

Body Wood: Alder Wing
Neck Wood: Maple (Quarter-sawn)
Fingerboard Material: Ebony
Fingerboard: 12-16R Compound
Frets: Jumbo (22 frets)
Nut Width: 43.5 mm
Neck Profile: 1st Fret: 10.3 mm / 12th Fret: 22.0 mm
Neck Joint: Through-neck
Neck Scale: 25.5 inches (long scale)
Pickups: EMG “81-X” & “85-X”
Controls: 1 Volume / 2 Tone / 3-way pickup selector / Kill switch
Tuners: Rotomatic
Weight: 3.47 kg

Case: Original hard case